MARKER Squire 11 Bindings 2026

The Marker Squire 11 is the entry point into Marker's Royal Family lineup — a lightweight resort binding built for freeride and freestyle skiers who don't need a racer's release value but do want a binding that works with modern gear. The DIN range runs 3–11, which covers skiers from roughly 30 to 110 kg depending on your age and skier code. That ceiling matters: DIN 11 is the upper limit, so it's calibrated for lighter, intermediate-to-advanced riders who ski with energy but aren't regularly charging hard enough to need more retention force. The Triple Pivot Light 2 toe keeps the pivot point close to the boot for direct power transmission, while the Hollow Linkage 2 heel cuts step-in force by about 30–35%, which is noticeable day after day. Boot sole compatibility covers standard alpine (ISO 5355) and GripWalk (ISO 23223) only — there's no MNC, tech, or touring-sole certification here — so it pairs with the vast majority of current resort boots but not with hybrid or touring boots. Brakes come in 90mm, 100mm, and 110mm; the rule is to pick a brake equal to your ski's measured waist or up to about 15mm wider, with the sweet spot 5–10mm over. At 820 g per binding with a 24 mm standing height, it's light and low-profile without being fragile.

The Squire 11 is a strong pick for lighter or younger adult skiers, intermediate park and all-mountain riders, and anyone stepping up from rentals who wants a real binding without overpaying for retention force they won't use. It's commonly the right call for adults under roughly 75 kg at an intermediate-to-progressive ability level. Who should not buy it: if you're a heavier, more aggressive, or expert-level skier who finds yourself at the top of release charts — or anyone who needs DIN settings above 11 — this binding won't hold you properly when it counts. Look at the Marker Griffon 13 instead, which extends the range to DIN 13 and is built for the harder-charging all-mountain skier. Backcountry or touring intent is also a non-starter here — the Squire 11 is a pure resort binding with no tech or touring sole compatibility. Get the brake width right before ordering: a brake narrower than your ski's waist won't clear the edges and won't deploy properly, while a brake far wider than the waist (say a 110mm brake on a 75mm ski) drags when you put the ski on edge. For an 85mm-waist ski, the 90mm brake is the correct fit, not too big. Marker sells replacement brakes separately if you're mounting on multiple pairs.

Technical Specs